As we all know, there are two types of network connections. There are two types, wired and wireless. If you have a wired connection at home, then the cable is connected with the system directly. In case you have a wireless connection. Then the cable is connected to the router from which the other devices in the surrounding range get internet access. However, in this article, we will be learning about home network security and how you can improve it.
Wireless connection supports internet access to multiple devices at a time. Whereas, wired connection gives access only to a single device at a time. It is one of the significant drawbacks of using the wired connection at home if you have to connect your entire family’s device.
When you connect your system with Ethernet, the Ethernet provides a bridge to the WiFi. It communicates with the internet service provider and gives internet access. Once you connect the cable to the router and switch on the power, the devices in a particular range get connected to the wifi.
Most of us are unaware of the fact that the router that we use in our homes is exploitable. There are many routers available in the market. However, your router is easy to hack by the cyber people and get access to our internal working system. There is ‘n’ number of loopholes and ransomware threats that provide the gateway for access to such people. That is why, it is important to learn the best ways for enhancing your home network security.
7 Ways for Enhancing Your Home Network Security
Below are some best ways through which you may improve your home network security for a decrease in your money bills.
Change the Username and Password of Your Wifi Regularly
It is one of the most famous protective measures to improve your home network security. If your neighbors connects to your wifi, the network disconnects them immediately. If your password is too weak enough to find, then no wonders, your data is elementary to be a hack. Some of the vulnerability issues that you’d see are “Krack vulnerabilities.” These are mostly present in WPA protocols(wireless protected access protocol). It would seriously affect all the devices connected to the wifi that you use at home. You can use a service called “SSID” (set service identifier) to change the name of your wifi. You can probably give some chunky names to make people confused about the device’s connectivity, especially if you live in huge apartments where multiple wifi’s works at a time.
Enable Your Network Encryption Option to Enhance Security
There are so many languages for encryption, such as WPA, WEP, and WPA2. Ordinary people are not aware of these encryption languages due to a lack of security. Let me tell you the expansion of these. WPA stands for WiFi Protected Access, WPA2 stands for WiFi Protected Access 2, WEP stands for Wired Equivalent Privacy. These are the security protocols used by many people. There are a few steps to follow for enabling these protocols leading to an enhanced home network security.
Switch off your wifi when not in use
It is always advisable to shut down the internet connection when you’re not at home or when you’re not using it. Let me tell you why! You are actually giving away for the malicious hackers to access your wifi or home network security. It might even serve as an opportunity for them to steal your valuable data.
The few advantages are: for security purposes, to surge protection and also reduce noise at home.
Where to Place the Router
People have no idea about how serious security issues can arise just because of the place where you put your router. It is advisable to place your router in the middle of the house for home network security. But why? People sitting at any corner of the house can get access to wifi equally. Placing your router in the middle of the house can also reduce the risk chances of having your wifi range too much outside your home region. Therefore, reducing threats.
Make a Habit to Change the IP address of Your Router Regularly
You should consider this before anything as it is the best way to improve home network security. It can make it a more tedious job for hackers to get access to your system.
Few steps to follow to change your IP address:
- Log on to the router’s deice control settings. Let me assist you to do it. Open your web browser and type your present IP address. It will look like something like this “https://192-168-10-253”.
- Once you press enter, enter your username and password to get into the page.
- Go for “Network”, select “LAN” in the menu bar.
- Now you will be able to change the IP address to your preference and save it.
- Switch off the DHCP functionality in the router.
DHCP is defined as “DYNAMIC CONFIGURATION PROTOCOL”. These are present in the router with every assigned network. To use the feature, you should enter your static address in the network settings
Use Firewall to Secure Your Wifi
Firewall is available as both software and hardware. The firewall already exists in the router. You can use it for your convenience. It serves as an additional feature of protection that most of the people are unaware of. If your router does not have the inbuilt firewall settings update, then you should install one for protecting your home network security.
In this article, we have seen ways to improve your home network security. Follow all these guidelines to keep your network safe and secure. Along with knowing the details of home security network, it is important to secure your printers and other related devices as well. As once hacked, any data is accessible if not protected. I hope this article helps you in safeguarding your WIFI. If you’re still not able to make it, revert back and we’ll help you.
- 1 7 Ways for Enhancing Your Home Network Security
- 2 Conclusion