Firstly let us know what a beacon is? What role does it play in the internet world?  Several times where you have undoubtedly come across a situation. You might face the low output of your internet. So during this process, a few numbers of troubleshooting methods are taking place. It includes steps like resetting, unplugging your router, changing configurations on your laptop, or even contacting your ISP. There have been most of the times where the beacon interval is almost ignored by the person facing problems.

But on the contrary, adjustment of your beacon intervals also plays a crucial role when it comes to troubleshooting, and people around need to understand that and imbibe that. Beacon interval does its job profoundly. As a result, people should always consider this part in the picture as well.

See Also: How To Perform Belkin Router Login? Simple Easy Steps

What Does The Term “Beacon Interval” Exactly Mean?

In layman’s language, a beacon interval is a packet of the broadcast that is sent by the router. This helps to put the wireless network into absolute synchronization. Additionally, a beacon also comes into play. As when a piece of specific information is to be received about the router. This information is included but not limited to SSID and other parameters as well.

Beacon Interval

Talking, in other words, the beacon interval is just an amount of frequency of the beacon – that is, how often the router broadcasts the tag. Most routers automatically set to a default of 100 milliseconds.

What Time Will Be Considered The Right Time To Adjust The Beacon Interval?

The adjustment is to made by the beacon interval depends upon the lag that will produce. On the other hand, there is a default setting of 100ms that may work fine for almost any network. The adjustments are only necessary when there is a significant major lag in wireless speeds. While troubleshooting other settings is not being productive on the rate of slow broadband service, you will have to adjust the beacon interval, because more of that, it’s a necessity.


What Are The Perks Of Keeping Your Intervals At A Higher Or Lower Level?

After knowing so much about beacon’s intervals, you will surely come across the above-mentioned question. Therefore, let’s head towards the benefits of keeping your intervals higher or lower.

A facility of adjustable settings towards the intervals provided by many of the routers, starting from 20ms to 1000ms and 100ms being the default number. A few guidelines can help you to come up with better or best settings, therefore following the instructions can help you majorly.

Higher Or Lower Level

Keeping your beacon intervals at a higher level comes up with a lesser problem. As keeping it on, 100ms means having a better speed without interruptions. When the router is using less bandwidth to send out beacons, more of its capacity is dedicated to network throughput. Some tried and tested method has shown that intervals at a higher level will have a long term router life.

Decreasing your beacon interval means that the router uses more of its capacity to send out beacons, leaving less bandwidth for network traffic. Lower ranges recommended using with multiple access points. As more frequent broadcasts allow devices to decide on the better AP for connection.

A significant drawback of lower settings is that they are majorly draining in nature when it comes to the battery of your devices. However, if you struggle to stay connected, the tradeoff may be well worth it to get a steady signal, especially in areas where there is interference.

See Also: How To do Linksys Router Login? Easy Troubleshooting

What Is The Right Beacon Interval Settings According To Your Needs?

Many of you would be stuck up with this doubt about what is the right one? And you end up having no form answer. Therefore, let us know about what is the correct beacon interval settings according to your needs.

In a case where you are facing a weak-signal scenario, it is preferable to have low settings because it is beneficial. On the contrary, if you want for longer battery life. A strong signal higher configurations preferred.

Right Beacon Interval Settings

The only rule which needs to be followed is that if you have a home network with a strong signal, you can keep it to the highest level that is having a strong message. But on the other part, you should also be careful that the number does not cross more than 700 MS. As it will lose the stability of the network, and that will be affected by the speed. However, you can keep it adjustable from 100 to 700ms.

No set number works best for all equipment and wireless needs. The number can set according to needs and requirements. Signal strength, your network, and your particular equipment settings are just part of what should be considered to find your ideal beacon interval. Tweaking and adjustment should be expected for optimal results.


How is the beacon interval determined?

The wireless access point determines the beacon interval and can be configured in the router's settings. The default interval is usually set to 100ms.

What is the effect of changing the beacon interval?

Changing the beacon interval can affect the network's performance and battery life of wireless devices. A shorter interval can improve network responsiveness and increase power consumption, while a longer interval can conserve power but may affect network latency.

What is the recommended beacon interval for a typical wireless network?

The recommended beacon interval for a typical wireless network is between 50ms and 100ms. This interval provides a balance between network responsiveness and power consumption.

Can the beacon interval be adjusted on individual wireless devices?

No, the beacon interval is determined by the wireless access point and cannot be adjusted on individual wireless devices.

Can the beacon interval be used to improve network security?

No, the beacon interval is not directly related to network security. However, a shorter interval can reduce the time available for hackers to launch attacks on a wireless network.

How can the beacon interval be adjusted on a wireless access point?

The beacon interval can be adjusted on a wireless access point by accessing the router's settings through a web interface or app. The specific location of the setting may vary depending on the router model and firmware version.

Final Words

All the information mentioned above is reliable and trustworthy. To get all your doubts sort and to get familiar with the topic go throughout the article. I am sure you will end up being transparent in your mind. The procedure and information mentioned above may fall right. You can refer to it and make cleared. I have tried saying and reaching out all the small details; therefore, give it a thorough look, and I am sure you will produce better output. You must reach out to every single detail that is mention. So that you will get yourself very clear and family by the topic.

See Also: How to Login To Netgear Router | Perform Netgear Router Login [2024]

Leave a Reply