Routers have become one of the most essential things of a house nowadays. It is preferred over mobile data because of its stability. There are, of course, a handful of routers that you can choose from. This article covers the basic techniques to log into the Arris TG1672G router. It is mandatory that you first read and understand the article. Only after that, you should proceed with the login.
One of the most renowned router brands is the Arris TG1672G router in the market. You can know the router’s brand by reading the manual or looking for the brand name on the router.
However, you should know more than just your router’s brand. The most basic thing you should be aware of is the login procedure of your router. This will help you to resolve minor issues such as internet speed. You do not have to wait for your technician to come and do it for you.
Performing The Arris TG1672G Login
It is not mandatory for you to be an expert in technical aspects before you perform the router login. Make it mandatory to follow the steps in the given order to avoid failure of the login.
The first step to do is to enter the IP address in the address bar of your search engine. For the Arris TG1672G router, it will be 192.168.100.1. You will then see a window where you will have to enter a set of usernames and passwords to enter.
Now, this is going to be the same set of credentials your technician gave you at the beginning of the installation process. It must be written down or stored somewhere by you, so spend time looking for it.
In case you do not remember such a thing, you can try out a set of default credentials. Note that these credentials only pertain to the Arris TG1672G router. For your convenience, it has been presented in the table below.
There are not many options to try from the list above. So, you should make it mandatory to try out all of them first. You might still find yourself in a situation where this does not work for you again. There are alternatives that you can still try to log into your router. Read on to find out as to what are the things that you can do to perform the login.
Alternatives When You Cannot Log Into Arris TG1672G Router
There are a bunch of things that you could try if you see that the default username and password do not work to log you in. Verify if your router’s body has a sticker attached to it. This sticker might be present on the sides of the router and will have the IP address. Cross-check if the IP address on the sticker matches the one we mentioned earlier. If you see that they are the same, you can go ahead and use that set of credentials.
Another option to try would be to surf the official website of the Arris TG672G router. Some router brands make this information available on their websites. So, you must go and hunt a little on their site for the same.
You can spend some time reading the manual of your router too. Every router comes with its manual in the box. Make it mandatory to read the Arris TG1672G router’s manual even though it sounds mundane.
See also: Orbi Admin Login Guide | Quick And Easy
How To Reset Your Arris TG1672G Router
The last option to consider is doing the reset of your Arris TG1672G router. Consider this option only when you have nothing else left. You need to understand that this process is irreversible so you should think twice before you do it. The reset of your router will be brought back to factory settings.
You must look for a small button at the back of your router for a small button.
Look for an object that is sturdy but not pointed to use to press the button. You can choose a twig, the back of a paperclip, or a toothpick for this purpose. Once you choose the object, all you need to do is hold-press the button until the lights of the router go off.
Make it a point to check if the router is connected to the power supply while you are performing this. Do not lift the object until you see the lights of the router turning back on.
Once that is done, you can be assured that your router has been brought to factory settings right now. One thing you can now try is the default username and password for the router.
We have presented the easiest ways for you to perform the Arris TG1672G router login. As mentioned earlier, you must stick to the steps that have been presented in this article for the login process. This is so that the router login process becomes a success. It is strongly advised that you first try out the default credentials that were mentioned earlier. Then, you can move onto trying the official website of your router for the username and password. When you realize that there is no other alternative, you can perform the factory reset.
At the time of performing the reset, you should take the help of your technician. It would be safer if you seek help because the technician is an expert. In case things go wrong, there is a chance to get it fixed immediately. Also, the chances of committing an error itself reduce when you seek help from your technician.