You must be using sim cards for getting internet, but did you know some devices do way more for you with better functionalities? Well, you might already know them as routers. Routers provide you with the internet, let you create guest networks, and are also very safe, secure, and reliable! One such brand that produces one of the best routers is Arris International. This article will guide you through performing an Arris DG3270 login:

Technology is at its peak today. We can also fix someone up with a fake arm or a fake leg that will do all the work that a normal hand would! We are evolving every day, and it is for the best, in most cases. Although it has its pros and cons, the world is undoubtedly becoming a better place every day.

Since the past year and a half, the world’s scenario has changed way beyond everyone’s imaginations. We are highly reliant on the internet and our devices like smartphones, laptops, etc. Therefore, almost every activity throughout the world requires connectivity.

arris dg3270 router

Arris DG3270 is one such excellent router model. If you are here reading this article, then it probably means you own one. If you want to perform a login to alter your LAN network’s name or credentials or for any other reasons, then you are at the right place!

How to Perform an Arris DG3270 Router Login:

You might already know that you could use a router for more than just satisfying your internet needs. There are a lot of features a router has that you can take advantage of, but to do that, you first need to log onto your Arris DG3270 router’s IP. Given below are three methods to do the same. Read the steps carefully and follow them.

First Method:

A router is a staple appliance in everyone’s house in today’s world. Most of us use it only for accessing the internet, but in reality, one can do far more than that. One can set parental controls and also restrict accessing specific websites, etc. To enjoy these features, you need to be logged onto your router’s IP. There are three methods by which you can do that. Try each one unless you are finally able to log in. All three of them are given below:

  • Firstly, make sure that your Arris DG3270 router is connected to your PC correctly. You can connect your PC either over the LAN network or through a wired ethernet connection. But it is preferred that you do it in a second way.

arris svg2482ac

  • Secondly, after checking if the lights are switched on/blinking, open a web browser on your PC. Then, enter your Arris DG3270 router’s IP into the address bar. Your IP might be one among any given in the table here:  
Sr. No. Default IP

Now, click ‘enter’.

  • After doing all the steps above without any mistakes, you will subsequently see a login page on your web browser. The prompt on the screen will the user for their user ID and passcode. However, if you are unaware of the default credentials combination for your Arris DG3270 router, follow the instructions below.

arris dg3270 login

  • The table given below also shows you the most commonly used user ID and passcode combinations; use them:
Sr. No. Username Password
1. admin password
2. (blank) given on the router
3. admin admin
4. cusadmin password
5. admin
6. (blank) (blank)
7. admin Motorola
8. admin 1234
9. arris arris
10. Admin Printed on the router label

Second Method:

Firstly, you have to find a sticker at the bottom of your router box. On this sticker, the manufacturer will print your router’s IP address, credentials, along with some other details. It might also print it on the router itself. Use this combination by opening your web browser and following the steps given in the above method.

airtel huawei router sticker

Third Method:

Reaching the third method most probably means that you had changed your credentials at one point, but you probably forgot them. I mean, you already have enough stuff to take care of as it is! However, you can reset it using the following method

Firstly, locate a tiny hole at the rear of the router. Then fetch a slender but sturdy tool like a toothpick. Also, don’t forget to make sure it is not very pointed. Then, insert this tool into the reset button and keep it pressed for around twenty seconds. When you do this, the router will automatically power off, switching back on. This means that the router has been reset. Hence, you can now perform the login as described in the above methods.

press the button with pin

See Also:

Arris DG1670 Router Login Configuration And Password [Complete Guide] IP Address Login Admin | Default Username & Password IP Address Admin Login | Default Username and Password


Therefore, logging onto your router is pretty straightforward. This article has also explained all the necessary steps and methods to perform a login without any problems. However, if your router malfunctions sometimes, you can try restarting/resetting it. But. persistent problems are not a good sign, in that case, you can contact their support team. You can also switch to other brands and models of routers available in the market. 

Leave a Reply