If you are someone who finds the login and setup of your internet routers complicated, do not worry – you are not alone. Configuring the wifi modem is tricky for many, especially during the maiden setting. If you are looking for alternatives to do a wavlink router login, you have approached the right page. Here, in this article, you will see a detailed guide on the several default username and passwords for Wavlink router login and the step-by-step guide.

wavlink router

The login process for your Wavlink router is just like most of its counterparts. You have to open your browser and type in the search bar the preset Wavlink IP address: or the official Wavlink login URL. After this, enter the default Wavlink router username and password. Press ”Enter”, and now you can access your modem’s control panel and the admin account.

This process was simple, right? Nonetheless, if you still have problems logging in, you may want to read further as we will delve deeper into the topic. ”What are the default credentials?” ”What if my Wavlink login does not succeed with this method?” Read on to solve all your queries regarding wavlink router login. You can also refer Default Username And Password For Tenda Router Login.

See Also: Netgear Nighthawk Router Login Complete Guide [Step by Step]

The Default Wavlink Login Credential For Different Models

These credentials are required during your Wavlink setup. You can obtain the details and user manuals for all the models from the Wavlink Router Manuals uploaded online.


Default Username


Default IP Add






















First Method Of Login

The easiest Wavlink router login method is using the standard Wavlink IP address and proceeding accordingly. The guide for this method is as follows:

  1. First, you need to open your internet browser (any browser is fine).


2. In the search bar, type IP or address

3. The page will ask you to enter the username and password of your admin account. Both the codes are Wavlink’s most frequently applicable IP.


4. You can enter the default credentials in both fields. The most used combination is Username: admin – Password: admin.


It would help if you now press ”Enter,” which will guide you to your admin account and you can do a router login for wavlink.

See Also Access To Crucial Things- On How To Transfer Passwords To New IPhone

Second Method Of Login

The default method for Wavlink router login is to use your admin account using the model name of your router. In case you know the model of your router:

  1. Visit the official page – wifi.wavlink.com login.router
  2. On the open page, you will see the option ‘‘Which Wavlink router model do you have?” From the drop-down bar, select the model of your router or manually enter the name.
  3. You will be redirected to the user manual and a guide for your router model.
  4. The steps for entering username and password remain the same as above to login into your wavlink router.

You can review the list above to identify your Wavlink router and log in using its default credentials.

See Also: How to Do Telus Admin Login | Complete Guide 2024

Third Method Of Login

There is a possibility that you are not able to log in using the methods mentioned above. Maybe you changed the password and cannot recall it anymore. So, how to now do the Wavlink router login? When such a situation arises, the most feasible solution is to reset the modem. It is very difficult to reset your password on your router during login once it is different from the default, is forgotten, and no recovery method is added. Check Out this article about how to reset a Spectrum Router.

Your best choice here is to reset the device to factory default. The factory reset reverts the changed credentials to the Wavlink Router’s Login default password and username on the modem label. You can conduct a fresh wavlink router login to the admin account by the following steps:

The steps to reset the router:

  1.  A red button will be present on the backside of the modem. This button is the ”Reset” button.reset button
  2. To press this button, use a thin object like a toothpick, safety pin, or paper clip. Keep pressing till the lights of the Internet LED turn red.
  3. The router will restart on its own. Leave the device for 10-15 minutes to allow booting and configuration. ip address
  4. After this, follow the mentioned above admin login procedures with the default username and password. This way, you can conduct a successful wavlink router login.

See also: Wavlink Router Login – Default Username, Passwords, And IP Address 

But What If The IP Address Is Changed And Forgotten?

If you changed your IP wavlink router login from the default but have now forgotten it, there are two ways to get the IP back:

  • There is a high possibility that the IP of the default gateway of your desktop is the same as the router’s IP. You need to follow these steps: Start -> Run -> enter ‘cmd’ -> enter ‘ipconfig’. The results shown are most probably the IP address you are looking for.ipconfig
  • If the IP addresses of the two do not match, the only option left is a device reset to will revert your changed IP to the Wavlink Router default IP address.

The Admin Page & Other Router Settings

After you have seen the several methods of the Wavlink router login, let us briefly overview the changes you can make to the router settings through your admin account:

  • You can modify wavlink router login credentials (username and password) to your choice and monitor the devices connected to your router.connected device
  • Upgrade the firmware and other security features.
  • You can simplify your network name.
  • Also, change the wifi password.
  • You can modify the DNS server and the internet channel of the router signal.

See Also: How Much Electricity Does A Wi-Fi Router Use: Guide

Frequently Asked Questions (FAQs)

How can I log in to the Wavlink admin account?

To access your account for your Wavlink router, you can visit the wifi.wavlink.com login page and enter your details. You can visit your account through the default IP address. You can also install the Wavlink mobile application, known as WavRouter, from Google and Apple stores and complete your Wavlink Router Login.

Can I do my Wavlink router login from my smartphone?

Yes, you can access your Wavlink admin account from your smartphone. You can follow the same login steps you would follow for your laptop or desktop or access the account through the wifi.wavlink.com login page. Nevertheless, the mobile app for Wavlink, the WavRouter, is a better alternative than the browser login.

Should I add a recovery email address to the Wavlink account?

Yes, you should always have a recovery email address or a phone number added to your account in case you forget your credentials during the wavlink router login. You can do so by accessing the 'Password' page of your account.

What is the Wavlink wifi Extender?

The Wavlink routers come with the facility of wifi extenders. The Wavlink wifi Extenders are tools to extend the area of your wifi coverage. These extenders help eliminate any wifi blind spot in your house and increase connectivity speed.

See also: A Luxurious Way- On Crestron Default Password | Default Login


In the article, you saw the Wavlink router login default passwords and usernames for all the major Wavlink router models. You saw all possible methods to log in to your admin account for the Wavlink router. Not just that, you now also know how to change the information and reset the device to factory default as per your need and convenience. Wavlink is one of the leading wifi providers in the country now, known for its excellent network channels and high-speed Internet. Their routers are trusted and used by thousands of customers who vouch for the credibility of this wifi provider. You can also refer Graphic Output On A Page- On Zebra Printers Default Password

See Also How To Set Up Post Forwarding | Easiest Ways To Do It

Leave a Reply