Some people own dlink dir655 routers and don’t know how to login or get past the login screen. This simple dlink dir655 default router login guide will show you how to get around the dlink dir655 router.
You can find out your IP address, port forward, change your username/password combination, and much more!
See also: Realtek Default Router Login – IP Link And Password
Dlink DIR655 Default Router Login Steps
This D-Link N Wi-Fi Dual Band Router (DIR-655) is an advanced Wireless N Router with a speed of up to 300 Mbps which gives you a better range throughout your home or office, suitable for multiple devices that require faster speeds and larger coverage area.
It is one of the most popular home routers in today’s market. It can be used to connect devices such as PlayStation 3, Xbox 360, and Apple TV.
This router can be used as a default wireless router to provide access network for home computers and mobile devices such as iPad, laptops, etc.
There are 4 ports available on this dlink dir655 n600 wireless dual-band routers, which you can plug Ethernet cables into to spread the internet signal.
Features of D-Link DIR 655 router: Wireless N300 ADSL2+ Modem Router – 4-port 10/100 switch – NAT, SPI firewall – Wireless security 64/128 WEP, WPA / WPA2 PSK, WPS support – Works with all ADSL providers. Learn TEData Router Login here.
How To Login Into The Dlink DIR655 Router?
Here are the simple steps on how to login into dlink dir655 routers:
Step 1
Open your Internet browser (ex: Internet Explorer, Google Chrome, Mozilla Firefox)
Step 2
Enter the router’s IP address 192.168.1.1 into the address bar (the dlink dir655 default IP address). Some versions of this router have an alternate IP address that can log into it by doing a hard reset on the device. If you cannot log in using the first IP address, try other numbers in the 192.168.1.x range until you find one that works.
Step 3
Enter “admin” as a username and leave the password field blank or enter “password” for dlink dir 655 default password if there is no default password set previously by the user or admin.
Step 4
Click the login or OK button.
What Is The Dlink DIR655 Default Router Password?
To log in to dlink dir655 routers, you will need to know the default D-Link dir 655 usernames and passwords.
It is no secret.*Note: everyone can access this information. This is simply the way you enter the router’s dashboard so that you can begin customizing your Internet experience, so it suits your specific needs.
Default dlink dir 655 username: admin
Default dlink dir 655 admin password: blank or admin
Once you enter the username and password, it will prompt you to change your password.
Enter a new password and confirm it. Your D-Link DIR 655 login is now changed! You can always revert to the original settings if lost or forgotten by simply entering the same username and password.
You can also change your D-Link DIR 655 login information after you have successfully logged in by simply accessing the router dashboard or home page.
Then click on ‘settings’ (gear icon), then ‘Basic’ tab, then click “Change Password” to create a new one.
See also: How to Perform Dlink Router Setup [Complete Guide]
How To Reset The Dlink DIR655 Default Password?
If you don’t know the default login information of your D-Link DIR 655, then entering in an incorrect username or d’link default password dir-655 on the login screen will cause the system to lock you out. You can’t even perform a simple hard reset! No worries!
Here is how to recover your router password:
Use a paperclip or pushpin to press. Hold the reset button on the back of your D-Link DIR 655 for 30 seconds. After you finish, your router will reset to factory settings. If you have a hardware version lower than A (it should be printed on the bottom or back of your device), then skip to step 3.
Open a web browser and type 192.168.1.1 in the address bar, then press Enter on your keyboard. This is the default d link dir 655 IP address of most D-Link routers and will direct you to the login page if successful. If not, try 192.168.*.* or 192.168.*.**.
Click on the ‘Advanced’ tab, click the “Browse” button, select the second option, “Revert custom firmware to D-Link original firmware.” Click the “Upgrade” button, next click “Confirm.” After this process is complete, you will be able to log in with the default username & password for your D-Link DIR 655.
Once you have logged in, click on the ‘Wireless’ tab. Then select “Wireless MAC Filter.” Enter your desired password into the “New Wireless MAC Filter” field and click “Apply.” Then you will be able to log in using the new password.
See also: How To Find Router IP Address [Full Guide]
Conclusion
The dlink dir655 router is a very popular device in the market. In this article, we have covered the dlink dir655 default router login guide and some of the most popular features that make it one of the best routers available today. If you liked our post, please share it with friends or family members, looking for information about their new router!
See also: Guide to Home Network Monitoring | Everything You MUST Know
Hello people. I have started this website for all of you who have troubles while logging in into their router. I personally have faced a lot of issues and that is the sole motivation for starting this. Hope it helps you guys. Cheers!
