The internet is a massive asset for the world, and we as individuals have our lives dependent on it. Most businesses – including schools and grocery stores – have shifted online. Overall, the use of the internet has risen to an immense amount.

To cope with this change, people have taken up their private network connections. This is in the form of mobile data connections or WiFi connections. Most people prefer WiFi over mobile data because WiFi connections tend to provide a more stable connection. 

Numerous brands exist in the router market. Some of them are AirVast and iNexQ. The common attribute between these routers is that they have a standard IP address – 192.168.62.1. 

Apart from just knowing the IP address, you should know how to log into your router. This article will cover the techniques to help you perform the login of a 192.168.62.1 router.

See Also: 192.168.1.99 Admin, Username And Password

How To Login Into 192.168.2.1 Router?

Even if you are a beginner, logging into a router is nothing to be worried about. You should only follow the steps in the order they have been mentioned in.

First, you need to do is to type 192.168.62.1 in the address bar.

ip address
Ip address

It will then direct you to a login page where you have to enter the username and password. Here, you will have to enter the credentials your technician has given you. You might provide this at the time of the installation of the router. Look for a paper where you might have written these credentials. To know how to do Dlink router setup, click here.

admin login
Admin login

If you do not remember such a thing, you can try out the default username and password combinations. Refer to the following table for your assistance.

Username Password
admin 1234
admin 1324
(blank) admin

You can certainly try all of the credentials because there are not too many to try from. If none of this works out for you, there is no need to get worried. Read on to understand what is to be done if the default credentials do not work when the 192.168.62.1 router login.

See Also: Technicolor CGM4231MDC Login Guide [2024]

What To Do If Default Credentials Fail To Work For 192.168.62.1 Router?

You can still get into your router if the default credentials do not work for you. The first thing that you can do is look for the certificates on the body of the router. If there is a sticker with the IP address written as 192.168.62.1 on it, you can proceed. There might be a set of credentials that you can use to get into your router. The sticker might be at the back or on the sides of the router.

router reset
Router reset

Another thing that you can do is look for the credentials on the official website of the router. Some companies do mention on their website the credentials. It might take some time, but there is a chance that you can find it. Know how to orbi router login from this article!

The next thing to try is to look for the credentials in the manual. Every router comes with a manual. This might sound tiring, but you can undoubtedly get the credentials here. Do not skip this step because it is a very crucial step. 

The last thing to do is that you must perform the factory reset of your 192.168.62.1 router. This will be the ultimate step when you see that nothing works out for you.

First, you need to look for a small button at the back of your router. The button will be tiny, making it difficult for you to press it with your fingers. You can then look for an object to help you out with pressing the button. It can be the back of a toothpick or a paperclip – anything that has a soft yet sturdy end.

Once that is done, you have to hold-press the button until the lights of the router turn off. The internet might stop working at this instance. As soon as the lights come back, you can release the button – maybe after 30/35 seconds. This means that the 192.168.62.1 router have reset to factory settings. 

Conclusion

You now know how to perform the login of the 192.168.62.1 router now. What is important is that you follow the steps in the given order only. Make sure that you first try out the default credentials and everything else. Only when you do not find any other way of getting into your router can you perform the reset.

It is advisable that you seek help from a professional when you are dealing with this. You might have to spend more money, but you will get the things sorted correctly. If you take up matters into your own hands, there is a possibility that you might cause some problems.

However, the money that you pay to the technician will be lesser than the cost of possible damage. 

It is important to note that even after the factory reset, the IP address will be 192.168.62.1 only. This is because only the credentials after factory reset will be the default ones.

See Also: 10.0.0.138 Admin Login, User, Password And IP

Leave a Reply