There has certainly been a rise in the use of the internet over the past years. From shopping to courses, everything has been shifted to the e-mode. In recent years, it is evident that even schools and colleges have shifted to the e-platform.

To cope with the rise of internet usage, people have started taking up mobile data networks and WiFi connections. Most people use WiFi networks because it provides a more stable connection when compared to mobile data networks.

There are numerous brands in the market. For example, Cisco and TRENDnet are two renowned companies that have as their IP address. 

This article will help you understand how to log into a router with as its IP address. But, first, you must spend enough time understanding the process. If you skip a single step, you might get yourself into problems. 

See Also: Admin Login, User, Password And IP

How To Log Into IP Address Router?

It might sound not easy at first, but you can do this very easily. The only requirement will be to follow the steps in the given order. You will have to go to the login page of the router first. You can do this by typing in the address box.

ip address
IP address

Next, there will be a login page where you will have to enter the credentials. Here, you will have to enter the credentials given by your technician. You must have written it down somewhere.

admin login
Admin login

Apart from that, there is another way that can help you to log into your router. Here is a table of credentials that you can try to use. Make sure that it is entered properly. 

Username Password
cisco cisco
admin admin
1234 1234

It would help if you tried the combinations in the table above. There are a limited number of combinations so that you can try all of them. Do not forget that the IP address will always be in this scenario. 

There might be an instance where the above credentials may not work for you. However, this does not mean that you will have to worry. There are still ways that can help you in getting into the router that you have.

What To Do If The Default Credentials Fail To Work For Router?

It is not something to worry about if you are unable to log into the router. Many ways can help you to log in still.

The first thing that you can do is that you could check the sides of the router. There is a possibility that you will get it there in a written or printed format.

Possible changes to be made

You can also try looking at the official website of the site. There is a chance that the credentials will be present there. First, however, you might have to look for it a little. When you see that the IP address is mentioned as, then you are at the right place. It is only a matter of time that you will get the username and password.

Apart from that, you can also go through the manual of the router. It might sound a little tedious, but you will find the credentials there. It would help if you did not miss out on any chances of getting the router.

If you see that nothing can help you get into the router with as the IP address, try the ultimate. This will involve you factory reset the router. It is the last option in the list of dos. The process is extremely simple if you follow the steps properly. To know how to perform Dlink router setup, click here.


What you need to do is that you should look for a small button at the back of the router. The button is extremely small, and it might be a little challenging to find. Also, you may not be able to press the button with your fingers. There might be a requirement for an external object. You will have to make sure that the external object is not pointy. If it is, you might damage the button. Make sure it is sturdy, yet it does not damage anything – probably a paperclip or back of a toothpick can work. When that is decided upon, you can press the button.

You will see that the lights of the router might go out. The internet will go out for some time, but the router will work when the lights turn back on. When the lights are back, you can conclude that the router has been brought back to factory settings. 


What exactly is admin?

10.10 is a private IP address associated with your Wi-Fi network. You use the sequence of digits to access the router administration page. However, as previously noted, your router has a second public IP address.

How many devices may be connected to a network?

If 192.168. 0.0 network is configured with an address range of more than 255 clients, 192.168. 1.0 can be utilized securely. In actuality, however, such networks are uncommon.

How do you configure router settings when your IP address is

Routers utilize the IP address to allow users to access and manage their features and settings. To access your router's admin panel, enter into the address bar, hit Enter, then enter the relevant admin username and password.

What is the router's default admin login?

The most often used default username is admin, while the most commonly used password is admin or password.

What exactly is the router admin page?

Open a web browser and input your router's login URL or default IP address to visit the login page. Your router's login URL or default IP address is normally labeled Router Login or Default Access on the back or bottom of your router.

How many people can a router connect to?

Many wireless routers and access points can accommodate up to 250 connected devices. Routers may support a limited number (typically between one and four) of wired Ethernet clients while the rest are connected wirelessly.

Can a router have several IP addresses?

Your router has numerous IP addresses. It has a public IP address, a private 'management' IP address, and then further private IP addresses for each device in addition to the router's internal IP, which is your LAN default gateway.

What is the default IP address 192.168 101?

The Internet Assigned Numbers Authority (IANA) has designated as the default IP address for wireless routers and modems. To access the admin panel and update settings on your Wi-Fi router, open a browser and type,, or

What is the meaning of in the address bar?

You may access your router's admin panel by entering into your browser's address bar. Brands like TRENDnet, UPVEL, and D-Link often use

What exactly is an SSID in a Wi-Fi connection?

A service set identifier (SSID) is a string of characters to identify a Wi-Fi network. A network name is another term for an SSID. When numerous independent networks run in the same physical region, this name allows stations to connect to the selected network.

What exactly are router settings?

The settings for your home Wi-Fi network are saved on your router. If you wish to make changes to your network, you must first log into your router's software, often known as firmware. You may then rename your network, change the password, tweak the security level, and configure or change a range of other variables.


It is now clear how to perform the login router very simply. Make it mandatory to only follow the steps in the prescribed order. This will help you to avoid any problems that can arise. Furthermore, we mention it would be best to only stick to the order in which all of the technique. Do not directly jump onto resetting the router at any cost.

Only when the other techniques do not work for you can you then perform the reset of this router. If you see that or do the passwords work, nor do you get the credentials on the site, you can use the reset method.

Even when you are using the reset method, you must make sure that you take some assistance. It is not advised that you perform this on your own. The technician should be the one to help you out. If you take matters into your own hands, there is a chance that you will damage it. So, it is advised that you take some help from a person rather than causing some irreparable damage.

See Also: PS4 IP Address Setup Complete Guide

Leave a Reply