10.90.90.90 Admin Login, Username & Password

10.90.90.90 is what we call the Default Gateway Internet Protocol or merely the Default Gateway IP. It’s a default login IP reserved for modem or router. By typing in these IP addresses in your address bar, you’ll be directed to your router configuration page or the admin configuration page.10.90.90.90 is one of the default gateway IP for routers of Internet Service Providers such as D-Link.

By directing to standard IPs like 10.90.90.90, you can configure your internet and router settings. You can set your Wi-Fi password and configure other settings related to the Wi-Fi connectivity and Ethernet connectivity. Not only that, you can set parental controls to keep your kids’ internet usage on a check and also can change who can access your internet connection. Correct configuration of a router is needed to have internet access; otherwise, you won’t be able to access the world wide web.

There are many other standard IPs other than 10.90.90.90 like 192.168.1.1, 192.168.0.1 or 192.168.2.1, 192.168.1.254 and many more which are specific to different routers although they do have the same working at heart.

How to Log in 10.90.90.90 IP address?

Logging in to your 10.90.90.90 IP address is accessible. First of all, type in the IP address 10.90.90.90 in the address bar, and you’ll be directed to the router configuration page. You’ll be asked for a username and a password which you would have gotten when the ISP was setting up your connection.

See Also: Dlink DIR615 Default Router Login [Complete Guide]

Access Your Router Admin Panel





What to Do if You Forget Router’s Username and Password?

When you have been directed to your router configuration page, you’ll be greeted with a page asking for your login credentials, the user ID and the password. If you don’t remember it, don’t worry! Normally, the default ID and password is written on the modem’s bottom by the router providing company. Some default IDs and passwords that you can try are as follows:

  • ID – admin Password – admin
  • ID – admin Password – blank

If you’re still unable to login, you can contact your ISP and know your User ID and Password to access your router configuration page.

Here’s a quick tip though – When receiving your User ID and Password, you can change your credentials (especially the password) to something you can easily remember once you’re in the router configuration zone. This will help you in the long run if you tend to forget things easily.

Alternatively, you can also try resetting your router. To do this, locate a small hole in which a button resides. You can easily reach it with the help of a safety pin or some small needle. Insert the pin/needle and keep the button pressed for a few seconds. By doing this, you will reset your modem settings back to factory settings. Now again go to the IP address 10.90.90.90 and login with the credentials that are provided on the back of the modem. During the resetting procedure, you will be unable to access the internet for a while, so don’t panic; it will soon be restored. If you still have any doubts or low confidence in doing this, better take an expert’s guidance.

Refer Also:

How to Troubleshoot Router Errors?

Sometimes, you might get some error in your router due to which you won’t be able to access the internet. There are simple methods by which you can fix your router problems which are mentioned below –

Restart your Router

This is the easiest fix and works like a charm. All you have to do is to restart your router. For doing this, just turn your router off and then turn it back on. That’s it!

Check for Loose Connections

Sometimes due to loose cable connections, there can be some problems which can cause issues resulting in loss of your internet access. So check if there are some loose connections and do the required reconnections.

Reset Your Router

You can always reset your router to the default factory settings. For doing this, first, locate a small hole where all the ports of your router all. In this small hole, a small button resides, and by pressing it, you will be able to reset your router. But you can’t access this hole simply with your fingers. You need something small like a safety pin or a small needle, so make sure to keep that in handy.

Changing the Router’s Position

This is strictly for people who have trouble getting the Wi-Fi signal or good wireless speed despite having opted for a high-speed plan. For getting rid of this issue, you can keep your router somewhere where it would be able to get and transmit the signals easily (i.e. just reposition your router) because there are certain hot-spots in a certain area where you would get top-notch speeds otherwise get a reduced speed due to some interference in the transmission of signals.

List of Popular Router Brands Using 10.90.90.90 as Login IP

Some popular router brands which use 10.90.90.90 as their default gateway IP are D-Link. The models of the D-Link router which use 10.90.90.90 as their default gateway IP are as follows –

  • D-Link DGS-3224TGR
  • D-Link DWS-3600AP
  • DWS-6600AP
  • D-Link DWS-4026
  • D-Link DWS-8600AP
  • DES-6500
  • D-Link DGS-3612

Conclusion

10.90.90.90 is a default gateway IP which lets you access the router settings and lets you configure them so you can access the internet. To configure your router problems, you can easily login with your credential provided on the router or given to you by your ISP. You can change your Wi-Fi settings, put on parental control and keep a check on who’s using your internet connection.

Leave a Reply